SRAM Force Crankset (Rings Not Included) SRAM Force Crankset (Rings Not Included) $229.56 Default 175 170mm 172mm Default 175mm +3 available in stock Do you want to pick it up in store? More details Girona: Barcelona: Warehouse: We ship it today if you order it within 23HRS 39MIN Description Sizing Shipping Financing Related Products fileslib. The directions appear to state to tighten the preload adjuster against the BB, however, when I do this it leaves a washer loose between the adjuster and the crankarm. When I tighten it against the crankarm (the direction of the + arrow on the adjuster) there is a large gap between the adjuster and the BB/Frame. The drive side is tightened to spec. The Force eTap AXS 43/40 crankset has a wider Q-Factor by 5mm than existing Force eTap AXS cranksets (placing each pedal an additional 2.5mm outboard from the bike's centerline). The change to the width of the crankset comes from the longer crank spindle, which moves the arms outboard by 2.5mm on either side.
Here is the info I found on XX crankarm, Grease the pedal threads and install pedals on the crankarms. Torque to 47-54 N∙m (461-477 in-lb). Use pedal washers if the. pedal contact surface is not flat and smooth. Which translates to about 38 ft lbs. So in this case an automotive torque wrench will be in the right spot.
The SRAM Force AXS crankset delivers more modern gearing and refined shifting performance. The crankset is designed using smaller chainrings with a consistent 13-tooth gap between both size variants in order to achieve more range and closer steps. The crankset is designed specifically for electronic shifting and can be upgraded to a power meter.