• Service mode allows sensor to operate as a service switch in the unlikely event of a failure • Sensor coverage tested to NEMA Guide Publication WD 7-2000 • Compatible with decorator wall plates • BAA/TAA-compliant models available. MANUAL-ON CONTROL. Factory default operation is for Manual-ON, so that users turn . lights on only when the sensor to trigger occupancy, the DCLV2 will normally set the load to the dimming level that it was at when Manual-On or Auto On is enabled. The DCLV2 is programmed to default to the Manual-On setting. If switched to Auto-On mode, the DCLV2 defaults to 50% Partial-On if no adjustments are made. If connected to a sensor, the lights Occupancy Sensor, 360°, Ceilng Mount, Ultrasonic, 24VDC, Coverage: 500 Sq. Ft. Wattstopper's W Series Ultrasonic Ceiling Sensors are versatile motion detectors that control lighting in a wide variety of applications. W Series Sensors can be used individually or as part of an integrated system of Wattstopper lighting control products. To Test Occupancy Sensors 1. Ensure the Time Delay is set for Test Mode* using the "Test Mode/20 minutes" setting. (DIP switches 1, 2, & 3 are OFF). 2. Ensure that the Light Level is at default (maximum). Press and hold the pushbutton for 5 seconds or until the Green LED flashes rapidly. Wait 10 seconds for the flashing to stop. 3. The WS Series features a built-in light-level sensor, adjustable from 2 to 200 footcandles, that holds lights off in the auto mode when natural light levels are above the preset light level. The WS Series has an adjustable time delay for turning the lights off when no occupancy is detected, and it also has an adjust-able sensitivity setting. The Wattstopper WS Series occupancy sensor is a decorator style automatic wall switch with an attractive, low profile design. It replaces a standard wall switch to turn lighting on when a room is occupied and off when the room is vacant. The WS Series has advanced passive infrared (PIR) technology and a two-level lens to sense when a room is occupied. wattstopper dw-100 manual. Watt stopper wall switch box occupancy sensor, 1050 sq ft passive. Dual tech wall switch occupancy sensor, 120/277v, black. Occupancy vacancy sensors. wattstopper dw-100 manual. mode is enabled. If the sensor registers occupancy, the load will return to its previous level. After the 30 second retrigger period, when the sensor registers occupancy, the load will respond based on the Manual On or Auto On setting from the DCLV2. Resetting to Factory Defaults Facory default for the DCLV2 is Manual On with Partial On enabled Overview. Occupancy Sensor, 360°, Ceiling Mount, Ultrasonic, 24VDC, Coverage: 2000 Sq. Ft. Wattstopper's W Series Ultrasonic Ceiling Sensors are versatile motion detectors that control lighting in a wide variety of applications. W Series Sensors can be used individually or as part of an integrated system of Wattstopper lighting control products. Wattstopper DT-200 Dual Tech Occupancy Sensor Occupancy Sensor, Dual Technology Sensor, 24 VDC, Light Level, Insulated Relay,Coverage: 2000 Sq. Ft. Wattstopper Installation Manual - Wattstopper Warranty. $256.07 EA. Usually ships in 1-2 weeks. Company Wide: 0. 1 In other users' carts . The PW sensor can turn a load on, and hold it on as long as the sensor detects occupancy. After no movement is detected for the selected time delay, the lights switch off. A "walk-through" mode can turn ligh