To change the CPAP pressure settings for a Philips Respironics System One, first remove the smart card. Power the device. Highlight the setup menu and press down on the control wheel and the ramp button for at least five seconds. After the machine beeps twice, release the control wheel and ramp button to switch the screen to provider mode. Use this mode to change the CPAP pressure settings. To access provider mode: 1. Supply Power to the device. First, plug the socket end of the AC power cord into the power supply. Then plug the pronged end of the AC power cord into an electrical outlet that is not controlled by a wall switch. Finally, plug the power supply cord's connector into the power inlet on the back of the device. 2. The instructions in this manual are not intended to supersede the health care professional's instructions regarding the use of the device. • The prescription and other device settings should only be changed on the order of the supervising physician. • The operator should read and understand this entire manual before using the device. PAGE II 1054417, VER. 01 Alice® PDxTM Service & Technical Reference Manual LIMITED WARRANTY Respironics, Inc. warrants that the Alice PDx device shall be free from defects of workmanship and materials and will perform in accordance with the pr oduct specifications for a period of two years from the date of sale by Read and understand both the User Manual and Provider Manual before setting up the device. This manual provides you with instructions on how to access and navigate the provider screens used to modify device settings. Note: The screens shown throughout this manual are examples only. Actual screens may vary slightly. Intended Use User Manual 1 Intended Use The Philips Respironics DreamStation systems deliver positive airway pressure therapy for the treatment of Obstructive Sleep Apnea in spontaneously breathing patients weighing over 30 kg (66 lbs). It is for use in the home or hospital/institutional environment. Important Thanks to Apnea Board member mjbearit, we now have the Service Manual for the Philips-Respironics System One REMstars and BiPAP machines on our Members Only Files page. This is not the "Clinician Manual" or "Provider Setup Manual", but rather the technical manual for repairing the machines. It is a 116 page PDF document that is 15.1 MB in size. 4 User Manual System Contents Your BiPAP autoSV Advanced System One includes the following items: • Device • Flexible tubing, 22 mm (optional 15 mm tubing is also available) • User manual • Power cord and power supply (Part# 1058190) • Carrying case • Side cover panel • Reusable gray foam filter • SD card Provider's Manual: Respironics PR System One REMStar 60 Series A-Flex Auto CPAP (DS560TS): Click here PR System One BiPAP AutoSV (DS960TS/DS960HS): Click here PR System One BiPAP ST (DS1060TS/DS1060HS): Click here PR System BiPAP AVAPS (DS1160TS/DS1160HS): Click here PR System One REMStar Plus CPAP (DS250HS): Click here ShopPhilips Respironics CPAP Products.Philips Respironics DreamStation Manuals Philips Respironics System One 50 Series Apnea Board was created to promote "patient empowerment"-- we believe patients are their own best primary care provider. You can and should be trusted with the knowledge of how to adjust pressure settings on your own CPAP The Philips Respironics REMstar SE system delivers positive